(618) 234-3630
905 West Blvd. Belleville, IL 62221
Goodall Tire Logo
Home
/
/
What Information Should You Have Before Calling an OTR Tire Supplier?

What Information Should You Have Before Calling an OTR Tire Supplier?

Share Article:

When a piece of heavy equipment needs a replacement tire, finding the right one involves more than simply asking for a loader, grader, or earthmover tire. OTR tires come in a wide range of sizes, constructions, tread designs, and specifications, and the right choice depends heavily on the machine and how it is being used.

Having a few key pieces of information ready before contacting an OTR tire supplier can make the process faster and help narrow down the available options. Whether you’re looking for a new tire or considering a quality used OTR tire, here is what you should know before making the call.

1. Tire Size

The most important place to start is the size of the tire currently on the machine. OTR tire sizes are typically molded directly into the sidewall and may look something like:

  • 23.5R25
  • 26.5R25
  • 29.5R25
  • 17.5R25

Write down the complete size exactly as it appears on the tire. Even small differences in the markings can be important.

If you’re unsure which numbers identify the tire size, taking a clear photo of the sidewall can also be helpful.

2. Machine Make and Model

Know the manufacturer and model of the equipment the tire will be installed on.

For example, don’t stop at “wheel loader.” Providing the exact make and model gives your tire supplier more information to work with when identifying appropriate options.

This can be especially useful if you’re replacing tires on older equipment or aren’t certain whether the tires currently installed are the original specification.

3. How the Machine Is Used

Two machines that use the same tire size may operate under completely different conditions.

Let your supplier know what the equipment does on a typical day. Is it working in a quarry? Moving material around a construction site? Operating primarily on packed dirt? Traveling over rock, mud, concrete, or pavement?

The application can affect which tread design, construction, and tire characteristics are appropriate for the job.

4. Tire Position

Be prepared to explain which tire needs to be replaced.

Depending on the machine, that could mean identifying whether the tire is going on the front or rear and, when relevant, which side of the equipment.

This becomes particularly important when you’re replacing only one or two tires rather than an entire set. The supplier may need to consider how the replacement will match the tires already on the machine.

5. Radial or Bias Construction

If you know whether the existing tires are radial or bias, mention that when contacting the supplier.

The designation in the tire size can sometimes provide a clue. For example, the “R” in a size such as 23.5R25 indicates radial construction.

If you’re unsure, provide the complete sidewall information or a photo rather than guessing.

6. Current Brand and Tread Pattern

Write down the manufacturer and, if visible, the tire’s model or tread designation.

You don’t necessarily need to purchase the exact same brand again, but knowing what is already installed can help your supplier understand what you’re trying to match.

This is particularly useful when replacing a single tire on a machine that still has usable tires in the other positions.

7. Condition of the Other Tires

If you’re replacing only one tire, take a look at the others before calling.

How much tread remains? Are they all the same brand and model? Are they wearing evenly? Were they installed at approximately the same time?

A brand-new or lightly worn replacement may differ considerably from a tire that has already accumulated substantial wear. Providing information about the existing tires can help when discussing replacement options.

8. New or Used OTR Tire

Know whether you’re specifically looking for new, used, or are open to either.

Quality used OTR tires can be an option for certain equipment and applications, particularly when you’re trying to control operating costs or need a replacement for an older machine.

If you’re open to used tires, tell the supplier how the machine is used and what you’re looking for. That gives them a better opportunity to identify an available tire that fits your needs.

9. How Many Tires You Need

It sounds simple, but make sure you know whether you’re looking for:

  • One replacement tire
  • A matched pair
  • Tires for one axle
  • A complete set
  • Multiple tires for several machines

Providing the quantity upfront makes it easier for the supplier to check inventory and determine what matching options are available.

10. Photos Can Help

When you’re unsure about any of the information above, take pictures before calling.

Useful photos can include the entire tire, the sidewall markings, tread pattern, damaged area if applicable, and the machine itself.

Clear pictures can provide valuable information when you’re trying to identify a tire or find a suitable replacement.

A Little Preparation Can Save Time

When equipment is sitting because of a tire problem, the goal is usually to find the right replacement and get the machine back to work as quickly as possible.

Before contacting an OTR tire supplier, gather as much information as you can about the tire size, machine, application, tire position, construction, existing tires, and quantity needed. You don’t have to be a tire expert—you just need to provide the details that help the supplier understand what you’re working with.

Goodall Tire & Steel carries a large selection of used OTR tires for heavy equipment applications. If you aren’t sure exactly what you need, provide the information you have and the Goodall Tire team can help you determine what available options may fit your equipment and application.

Tags:
Share Article:
Goodall Tire Logo
  • 905 West Blvd. Belleville, IL 62221
  • (618) 234-3630
  • (618) 234-3698
Monday
8:00 am - 4:30 pm
Tuesday
8:00 am - 4:30 pm
Wednesday
8:00 am - 4:30 pm
Thursday
8:00 am - 4:30 pm
Friday
8:00 am - 4:30 pm
Saturday
CLOSED
Sunday
CLOSED
© Goodall Tire Company. All Rights Reserved. Refunds and Privacy Policy | Terms & Conditions